Step-by-Step Guide to Using an Inflatable Pipe Plug for Sewer Line Testing

A Pipeline Plug is an inflatable device for testing the flow of your sewer line. Its highly useful application helps anyone to be aware of any issues with the sewer line. Quickly test your line for any trouble with the Inflatable Pipe Plug. You can follow these safety and operational guidelines to use the balloon plug pipe and inflatable pipe test plug. Here are a few tips for your reference.  

What are the Working Principles of the Inflated Pipe Plug? 

An inflatable pipe plug is like a rubber balloon filled with air or water. Once you fill it, the plug expands and blocks the sewer line. At this point, it becomes important to exert pressure on this blockade to ascertain that you do not have any leaks or blockage in the sewer line. With the blockade in place, it becomes much easier to notice if any zone water escapes or an object sits inside the line. This knowledge now allows them to easily recognize the problems that need to be fixed. 

Selecting Compatible size Plug:

For any application, the most crucial decision is the selection of the right Inflatable Pipe Plug for your sewer line. You have to select one that seals the best for your sewer line. If the plug pipe is too small, it will not affectively be able to stop the line, neither will it help tracing any problems. If the plug is too big, it probably won't fit inside the sewer line in the first place, so in any testing scenario, it would be useless. Thus, always check the size of the plug so that you get the right one.

Pressure: Set Up and Control Tips

When using an inflatable pipe balloons, correct setup of the plug and control of the pressure are very important. Insert the plug into the sewer pipe first. Once in place, air or water may be introduced into the inflatable pipe plug. But care should be exercised while in use, so as not to give it pressure beyond its designed power; the Inflatable Pipe Plug can burst from overfilling or excessive pressure. Always watch the pressure as you fill it to ensure its own safety and that it does not go to overfill.

Checking for leaks and damage: 

Otherwise, standing there about the likely leaking series and anything that shows to be damaged while you are conducting a test on the sewer line with the Inflatable Pipe Plug should be avoided. You must start making repairs right away upon spotting leakage or the appearance of any damage. Damage and leaking that you let go may cause trouble in the future adding to sewer line failure or a mess at your site. Keeping your eyes opened while testing the sewer line becomes very important to avert problems in the future. 

Deflate the Plug Safely and Remove

Finally, the air or water in the pipe plug should be released in a slow and controlled manner when the Inflatable Pipe Plug is done testing the sewer line. This is referred to as deflating. The plug can be gently pulled back from the sewer line once empty. Just remain cautious so as to not jeopardize the condition of the plug and sewer line. Eventually, you should dispose of the plug properly.

One simple means of controlling your sewer lines is the use of an inflatable pipe test plug. Just be sure to follow the steps carefully to ensure safe and effective operation of the tool. Hopefully, these tips will allow you to easily test and confidently go ahead in determining any threatening problems that could be lurking in the inside of the line.